Creality K1C
Creality K1C against 176 TPU products: 147 fit, 0 cannot reach the full recommended range, 0 cannot print this material at a recommended temperature, and 29 are missing an essential check. Manufacturer page checked 14 October 2026.
| Filament | Result | Why | Buy |
|---|---|---|---|
| Amolen Glow TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Anycubic TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab TPU 85A | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab TPU 90A | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab TPU 95A HF | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab TPU for AMS | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| colorFabb TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Creality 95A TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Creality HP-TPU | — | Nozzle temperature is not in our current sources. | |
| ELEGOO Rapid TPU 95A | — | Nozzle temperature is not in our current sources. | |
| ELEGOO TPU 95A | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Eryone TPU | — | Nozzle temperature is not in our current sources. | |
| Eryone TPU 90A | — | Nozzle temperature is not in our current sources. | |
| Eryone TPU High-Speed | — | Nozzle temperature is not in our current sources. | |
| Eryone TPU Rainbow | — | Nozzle temperature is not in our current sources. | |
| eSUN 3D TPU-95A | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| eSUN 3D TPU-LW | — | Nozzle temperature is not in our current sources. | |
| extrudr FLEX Hard CF TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| extrudr FLEX Hard TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| extrudr FLEX Medium TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| extrudr FLEX Semisoft TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Hatchbox TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Inland TPU | — | Nozzle temperature is not in our current sources. | |
| JAYO TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Kingroon TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Overture High Speed TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Overture Luminous High Speed Glow TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Overture TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker Polyflex 95 Hf High Speed TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker Polyflex TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Prusament TPU 95A | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Siraya Tech Fibreheart TPU-GF | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Siraya Tech Flex TPU 64D | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Siraya Tech Flex TPU 85A | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Siraya Tech Flex TPU Air 85A | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Siraya Tech Roamr TPU Air HR 80A | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Siraya Tech Roamr TPU Air HR 85A | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SUNLU 95A High Speed TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SUNLU TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SUNLU TPU Silk | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SUNLU TPU90A | — | Nozzle temperature is not in our current sources. | |
| SUNLU TPU95A | — | Nozzle temperature is not in our current sources. | |
| 3DEA TPU 95A | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DEA TPU 95A CF | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DEA TPU 98A | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DJAKE TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DJAKE TPU A95 | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DPower Elasti 90A TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech TPU 3DXFlex | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech TPU 3DXFlex GF30 | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech TPU 3DXStat ESD | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech TPU GF | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Add-North Matte TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Add-North TPU EasyFlex | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Add-North TPU Pro Matte 85A | — | Bed temperature is not in our current sources. | |
| Add-North TPU Pro Matte 95A | — | Bed temperature is not in our current sources. | |
| Alzament TPU 95A | — | Nozzle temperature is not in our current sources. | |
| Ambrosia TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| AzureFilm TPU 85A | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| AzureFilm TPU/TPE | — | Nozzle temperature is not in our current sources. | |
| CC3D Silk TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| COEX 3D Coexflex 60A TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| COEX 3D Hytrel 3D4000FL TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| COEX 3D TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Cookiecad TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Das Filament TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Das Filament TPU V2 Flexibel | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Devil Design TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Dremel TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| EasyPrint Flex 95A TPU | — | Nozzle temperature is not in our current sources. | |
| Eolas Prints Flex 93A TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Eolas Prints Flex D53 TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Eolas Prints Flex D60 UV Resistant TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Eolas Prints TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| EPAX 95A TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy Mattflex 40D Matte TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy TPU CF | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy TPU FiberFlex 30D | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy TPU FiberFlex 40D | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy TPU MattFlex 40D | — | Nozzle temperature is not in our current sources. | |
| FiberThree TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FiberThree TPU F3 80A | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FiberThree TPU F3 98A | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FilamentPM Flexfill TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FilamentPM TPU 96 | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura Python Flex TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Francofil 95A TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Francofil 98A TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Francofil TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Geeetech TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Gizmo Dorks TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| GST3D TPU | — | Nozzle temperature is not in our current sources. | |
| IEMAI TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Inslogic TPU 90A | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Inslogic TPU 95A | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| kexcelled The K8 TPU 64D | — | Bed temperature is not in our current sources. | |
| MatterHackers Mh Build Series Flexible TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| MatterHackers TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| NinjaTek Cheetah TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| NinjaTek Chinchilla TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| NinjaTek Edge TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| NinjaTek Glow TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| NinjaTek NinjaFlex TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| NinjaTek TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Paramount 3D TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polar Filament Biodegradable Flexible 95A Soft TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polar Filament TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PolyFlex TPU90 | — | Nozzle temperature is not in our current sources. | |
| PolyFlex TPU95 | — | Nozzle temperature is not in our current sources. | |
| PolyFlex TPU95-HF | — | Nozzle temperature is not in our current sources. | |
| PrimaCreator Primaselect TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaSelect TPU Flex | — | Nozzle temperature is not in our current sources. | |
| PrintedSolid Elixir Jessie Premium Silk TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrintedSolid Silk TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrintedSolid TPU PS Imports | — | Nozzle temperature is not in our current sources. | |
| Professional LAB TPU | — | Nozzle temperature is not in our current sources. | |
| Push Plastic TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| QIDI Tech TPU 95A HF | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| QIDI Tech TPU-Aero | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Recreus Balena Filaflex TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Recreus Conductive Filaflex TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Recreus Filaflex TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Recreus TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Recreus TPU FilaFlex 60A | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Recreus TPU FilaFlex 70A Ultra Soft | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Recreus TPU FilaFlex 82A | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Recreus TPU FilaFlex 95 Foamy | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Recreus TPU FilaFlex 95A Medium Flex | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments Glow TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments Impact Abrasive Uv H2O Microbe Resistant ROSA TPU HardTech+ 83D | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments Rosa Flex Glow TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments Rosa Flex TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments Rosa Tpu Automotive 15 Glass Fiber | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments ROSA TPU HardTech+ 83D | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart Flexible 87A TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart Flexible 95A Gt 3 TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart Flexible 95A Matte TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart Flexible Tpu | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart Gt 3 High Speed TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart Gt 3 TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart High Speed TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart Matte TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart Neon Cyberpunk Color TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart Pastel 92A Flexible TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart Small Spool Flexible TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart Temperature Sensitive Flexible 95A TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart TPU Liquid Luster | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart TPU Luminous Glow In The Dark | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart TPU Mango Mojito | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SMART MATERIALS 3D Glow TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SMART MATERIALS 3D TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SMART MATERIALS 3D TPU CF | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SmartPrint TPU | — | Nozzle temperature is not in our current sources. | |
| Snapmaker High Flow TPU95 | — | Nozzle temperature is not in our current sources. | |
| Snapmaker TPU | — | Nozzle temperature is not in our current sources. | |
| Snapmaker TPU 90A | — | Nozzle temperature is not in our current sources. | |
| Snapmaker TPU 95A HF | — | Nozzle temperature is not in our current sources. | |
| Spectrum TPU S-Flex 85A | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum TPU S-Flex 90A | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum TPU S-Flex 98A | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum TPU S-Flex Carbon | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| TECBEARS 95A TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| TEQStone TPU 95A | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| The Filament TPU-82A | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| The Filament TPU-87A | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| The Filament TPU-95A | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| TINMORRY 95A TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| XZN TPU 95A | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Zyltech TPU | Fits | K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. |
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
Creality K1C against 176 TPU products: 147 fit, 0 cannot reach the full recommended range, 0 cannot print this material at a recommended temperature, and 29 are missing an essential check. Manufacturer page checked 14 October 2026.
Fits means the nozzle, bed, and enclosure checks all pass. Partial means the printer can print at the low end of a range but cannot reach the full recommended range, or the stock nozzle is not hardened. Outside limits means a recommended temperature starts above the printer maximum. A missing essential check is not a fit.
0 in the tray
Compare