Polymaker Polymaker PLA Pro on the K1C

Check price at Amazon

FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.

Nozzle210–230 °C
Bed30–60 °C
Speed—
Dry55 °C maximum
Density1.237 g/cm³

Print at 210–230 °C nozzle, 30–60 °C bed. Dry at 55 °C if it's been open. No drying time on the source.

Nozzle210–230 °C

Bed30–60 °C

Shared scale, 0–320 °C. A missing bar means the manufacturer did not publish that temperature.

K1C maximums: nozzle 300 °C, bed 100 °C.

Filament page · K1C

Sources & notes

Creality K1C with Polymaker Polymaker PLA Pro: Whether an enclosure is required is not in our current sources.

Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.

Filament source · Printer source · Filament JSON

Creality lists nozzle temperature ≤300 °C, heatbed temperature ≤100 °C, a dual-gear direct drive extruder, a hardened steel nozzle tip, and an enclosed design with a glass door.

Questions

Can the Creality K1C reach the listed Polymaker PLA Pro nozzle temperature?

The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C.

Can the K1C reach the listed bed temperature?

The listed bed maximum of 60 °C is within this printer's maximum of 100 °C.

Is an enclosure required?

Whether an enclosure is required is not in our current sources.

Is a hardened nozzle recorded?

A hardened nozzle is not recorded for this filament.