Polymaker Polylite PLA on the K1C
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle190–230 °C
- Bed25–60 °C
- Speed40–60 mm/s
- Dry55 °C for 6 h
- Density1.17 g/cm³
Print at 190–230 °C nozzle, 25–60 °C bed. Dry 6 h at 55 °C if it's been open. Listed speed 40–60 mm/s.
K1C maximums: nozzle 300 °C, bed 100 °C.
Sources & notes
Creality K1C with Polymaker Polylite PLA: Whether an enclosure is required is not in our current sources.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Polymaker US PolyLite PLA product page · checked 14 October 2026 · Printer source · Filament JSON
Creality lists nozzle temperature ≤300 °C, heatbed temperature ≤100 °C, a dual-gear direct drive extruder, a hardened steel nozzle tip, and an enclosed design with a glass door.
Questions
Can the Creality K1C reach the listed Polylite PLA nozzle temperature?
The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C.
Can the K1C reach the listed bed temperature?
The listed bed maximum of 60 °C is within this printer's maximum of 100 °C.
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.