Eryone PLA-CF on the K1C

Search Amazon

FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.

Nozzle—
Bed—
Speed—
Dry75 °C maximum
Density1.24 g/cm³

No nozzle or bed temperature on the source. Dry at 75 °C if it's been open. No drying time on the source.

Nozzle—

Bed—

Shared scale, 0–320 °C. A missing bar means the manufacturer did not publish that temperature.

K1C maximums: nozzle 300 °C, bed 100 °C.

Filament page · K1C

Sources & notes

Creality K1C with Eryone PLA-CF: Nozzle temperature is not in our current sources.

Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.

Filament source · Printer source · Filament JSON

Creality lists nozzle temperature ≤300 °C, heatbed temperature ≤100 °C, a dual-gear direct drive extruder, a hardened steel nozzle tip, and an enclosed design with a glass door.

Questions

Can the Creality K1C reach the listed PLA-CF nozzle temperature?

Nozzle temperature is not in our current sources.

Can the K1C reach the listed bed temperature?

Bed temperature is not in our current sources.

Is an enclosure required?

Whether an enclosure is required is not in our current sources.

Is a hardened nozzle recorded?

This filament is recorded as needing a hardened nozzle. The stock nozzle is hardened.