Fits
Bambu Lab PLA Lite on the K1C
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle190–240 °C
- Bed35–65 °C
- Speedup to 250 mm/s
- Dry65 °C maximum
- Density1.4 g/cm³
Print at 190–240 °C nozzle, 35–65 °C bed. Dry at 65 °C if it's been open. No drying time on the source. Listed speed up to 250 mm/s.
K1C maximums: nozzle 300 °C, bed 100 °C.
Sources & notes
Creality K1C with Bambu Lab PLA Lite: K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Bambu Lab PLA Lite technical data sheet · checked 14 October 2026 · Printer source · Filament JSON
Creality lists nozzle temperature ≤300 °C, heatbed temperature ≤100 °C, a dual-gear direct drive extruder, a hardened steel nozzle tip, and an enclosed design with a glass door.
Questions
Can the Creality K1C reach the listed PLA Lite nozzle temperature?
The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C.
Can the K1C reach the listed bed temperature?
The listed bed maximum of 65 °C is within this printer's maximum of 100 °C.
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.