ELEGOO PETG-CF on the Ender-3 V3 Neo
Drying, drying.hours. Source: ELEGOO TDS · Last checked 18 October 2026
Source: Creality product page · Last checked 19 October 2026
How we verify: a figure is copied from a named source, and a missing figure stays blank. Methodology.
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle240–270 °C(464–518 °F)
- Bed65–75 °C(149–167 °F)
- Speedup to 220 mm/s
- Dry60 °C(140 °F)for 8 hManufacturer drying table →
- Density1.29 g/cm³
Drying. Source: ELEGOO TDS · Last checked 18 October 2026
Compatibility
- The listed nozzle maximum of 270 °C (518 °F) is within this printer's maximum of 300 °C (572 °F).
- The listed bed maximum of 75 °C (167 °F) is within this printer's maximum of 100 °C (212 °F).
- Whether an enclosure is required is not in our current sources.
- This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources.
Related answers
- Are carbon fiber filaments worth it, and do I need a hardened nozzle?
- Which nozzle (brass, hardened, 0.6mm) should I use for which filament?
- Why does PETG stick too well (or not at all) to my bed?
- How do I get good PETG prints?
Ender-3 V3 Neo maximums: nozzle 300 °C (572 °F), bed 100 °C (212 °F).
Filament page · Ender-3 V3 Neo
Sources & notes
Creality Ender-3 V3 Neo with ELEGOO PETG-CF: This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources.
Dataset imported 13 October 2026. Manufacturer page checked 19 October 2026.
Elegoo PETG-CF Carbon Fiber Filament for 3D Printers – ELEGOO US · checked 17 October 2026 · Printer source · Filament JSON
The specification table lists nozzle temperature ≤300 °C, heatbed temperature ≤100 °C, a 220 × 220 × 220 mm build volume, and printing speed ≤500 mm/s.
The extruder is listed as Sprite 2 Extruder. The page does not call it direct drive, and it does not state a nozzle alloy, so those fields are empty.
Filament compatibility is recommended PLA, PETG, and TPU (90A TPU or harder), and supported ABS and ASA with an enclosure recommended. Auto filament refill and identification are listed as yes with CFS nano. The page does not say the printer itself is enclosed.
Questions
Can the Creality Ender-3 V3 Neo reach the listed PETG-CF nozzle temperature?
The listed nozzle maximum of 270 °C (518 °F) is within this printer's maximum of 300 °C (572 °F).
Can the Ender-3 V3 Neo reach the listed bed temperature?
The listed bed maximum of 75 °C (167 °F) is within this printer's maximum of 100 °C (212 °F).
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources.