Creality Hyper PLA-CF on the Ender-3 V3 Neo
Drying, drying.hours. Source: Creality TDS · Last checked 18 October 2026
Source: Creality product page · Last checked 19 October 2026
How we verify: a figure is copied from a named source, and a missing figure stays blank. Methodology.
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle—
- Bed—
- Speed—
- Dry50–60 °C(122–140 °F)for 8 hManufacturer drying table →
- Density1.25 g/cm³
Drying. Source: Creality TDS · Last checked 18 October 2026
Compatibility
- Nozzle temperature is not in our current sources.
- Bed temperature is not in our current sources.
- Whether an enclosure is required is not in our current sources.
- This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources.
Related answers
- Are carbon fiber filaments worth it, and do I need a hardened nozzle?
- Which nozzle (brass, hardened, 0.6mm) should I use for which filament?
- Why is my filament brittle and snapping?
- What is HT-PLA / heat-resistant PLA (and PLA-CF) good for?
Ender-3 V3 Neo maximums: nozzle 300 °C (572 °F), bed 100 °C (212 °F).
Filament page · Ender-3 V3 Neo
Sources & notes
Creality Ender-3 V3 Neo with Creality Hyper PLA-CF: Nozzle temperature is not in our current sources.
Dataset imported 13 October 2026. Manufacturer page checked 19 October 2026.
Filament source · Printer source · Filament JSON
The specification table lists nozzle temperature ≤300 °C, heatbed temperature ≤100 °C, a 220 × 220 × 220 mm build volume, and printing speed ≤500 mm/s.
The extruder is listed as Sprite 2 Extruder. The page does not call it direct drive, and it does not state a nozzle alloy, so those fields are empty.
Filament compatibility is recommended PLA, PETG, and TPU (90A TPU or harder), and supported ABS and ASA with an enclosure recommended. Auto filament refill and identification are listed as yes with CFS nano. The page does not say the printer itself is enclosed.
Questions
Can the Creality Ender-3 V3 Neo reach the listed Hyper PLA-CF nozzle temperature?
Nozzle temperature is not in our current sources.
Can the Ender-3 V3 Neo reach the listed bed temperature?
Bed temperature is not in our current sources.
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources.