Fits
Bambu Lab PLA Tough+ on the Ender-3 V3 Neo
Drying, drying.hours. Source: Bambu Lab TDS · Last checked 15 October 2026
Nozzle, Bed, Speed. Source: Bambu Lab TDS · Last checked 15 October 2026
Source: Creality product page · Last checked 19 October 2026
How we verify: a figure is copied from a named source, and a missing figure stays blank. Methodology.
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle220–250 °C(428–482 °F)
- Bed35–65 °C(95–149 °F)
- Speedup to 150 mm/s
- Dry55 °C(131 °F)for 8 hManufacturer drying table →
- Density1.22 g/cm³
Nozzle, Bed, Speed, Drying. Source: Bambu Lab TDS · Last checked 15 October 2026
Compatibility
- The listed nozzle maximum of 250 °C (482 °F) is within this printer's maximum of 300 °C (572 °F).
- The listed bed maximum of 65 °C (149 °F) is within this printer's maximum of 100 °C (212 °F).
- Whether an enclosure is required is not in our current sources.
- A hardened nozzle is not recorded for this filament.
Related answers
- Why is my filament brittle and snapping?
- What is HT-PLA / heat-resistant PLA (and PLA-CF) good for?
- How do I get good PLA prints?
- Do I need to dry filament, and how?
Ender-3 V3 Neo maximums: nozzle 300 °C (572 °F), bed 100 °C (212 °F).
Filament page · Ender-3 V3 Neo
Sources & notes
Creality Ender-3 V3 Neo with Bambu Lab PLA Tough+: Ender-3 V3 Neo can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it.
Dataset imported 13 October 2026. Manufacturer page checked 19 October 2026.
Bambu Lab PLA Tough+ technical data sheet · checked 15 October 2026 · Printer source · Filament JSON
The specification table lists nozzle temperature ≤300 °C, heatbed temperature ≤100 °C, a 220 × 220 × 220 mm build volume, and printing speed ≤500 mm/s.
The extruder is listed as Sprite 2 Extruder. The page does not call it direct drive, and it does not state a nozzle alloy, so those fields are empty.
Filament compatibility is recommended PLA, PETG, and TPU (90A TPU or harder), and supported ABS and ASA with an enclosure recommended. Auto filament refill and identification are listed as yes with CFS nano. The page does not say the printer itself is enclosed.
Questions
Can the Creality Ender-3 V3 Neo reach the listed PLA Tough+ nozzle temperature?
The listed nozzle maximum of 250 °C (482 °F) is within this printer's maximum of 300 °C (572 °F).
Can the Ender-3 V3 Neo reach the listed bed temperature?
The listed bed maximum of 65 °C (149 °F) is within this printer's maximum of 100 °C (212 °F).
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.