Fits
Prusament PLA Lightweight on the Ender-3 V3 Mega
product, material, colors, spoolWeightsG, diametersMm, Diameter tolerance, Nozzle, Bed. Source: Prusament product page · Last checked 17 October 2026
Drying, drying.hours. Source: Prusament blog · Last checked 19 October 2026
Prusament PLA drying guide 45 °C for 6 h, not used for this product. Source: Prusament TDS
Source: Creality product page · Last checked 19 October 2026
How we verify: a figure is copied from a named source, and a missing figure stays blank. Methodology.
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle215–235 °C(419–455 °F)
- Bed50–60 °C(122–140 °F)
- Speed—
- Dry55 °C(131 °F)for 5 hManufacturer drying table →
- Density—
Nozzle, Bed. Source: Prusament product page · Last checked 17 October 2026
Drying. Source: Prusament blog · Last checked 19 October 2026
Compatibility
- The listed nozzle maximum of 235 °C (455 °F) is within this printer's maximum of 300 °C (572 °F).
- The listed bed maximum of 60 °C (140 °F) is within this printer's maximum of 100 °C (212 °F).
- Whether an enclosure is required is not in our current sources.
- A hardened nozzle is not recorded for this filament.
Related answers
- Why is my filament brittle and snapping?
- What is HT-PLA / heat-resistant PLA (and PLA-CF) good for?
- How do I get good PLA prints?
- Do I need to dry filament, and how?
Ender-3 V3 Mega maximums: nozzle 300 °C (572 °F), bed 100 °C (212 °F).
Filament page · Ender-3 V3 Mega
Sources & notes
Creality Ender-3 V3 Mega with Prusament PLA Lightweight: Ender-3 V3 Mega can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it.
Dataset imported 17 October 2026. Manufacturer page checked 19 October 2026.
Prusa product page · checked 17 October 2026 · Printer source · Filament JSON
The product page lists nozzle temperature ≤300 °C, heatbed temperature ≤100 °C, a direct drive extruder, and a 420 × 420 × 420 mm build volume.
Typical printing speed is 300 mm/s and max printing speed is 500 mm/s. CFS compatibility is listed as CFS and CFS nano.
Recommended filaments are PLA, PETG, and TPU (85A–95A). Compatible filaments are ABS and ASA, with an enclosure recommended. The page does not say this printer is enclosed, and it does not state a nozzle alloy.
Questions
Can the Creality Ender-3 V3 Mega reach the listed PLA Lightweight nozzle temperature?
The listed nozzle maximum of 235 °C (455 °F) is within this printer's maximum of 300 °C (572 °F).
Can the Ender-3 V3 Mega reach the listed bed temperature?
The listed bed maximum of 60 °C (140 °F) is within this printer's maximum of 100 °C (212 °F).
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.