ELEGOO PETG HF on the P1P
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle—
- Bed—
- Speedup to 600 mm/s
- Dry60 °C(140 °F)for 8 h
- Density—
No nozzle or bed temperature on the source. Dry 8 h at 60 °C (140 °F) if it's been open. Listed speed up to 600 mm/s.
P1P maximums: nozzle 300 °C (572 °F), bed 100 °C (212 °F).
Sources & notes
Bambu Lab P1P with ELEGOO PETG HF: Nozzle temperature is not in our current sources.
Dataset imported 16 October 2026. Manufacturer page checked 14 October 2026.
ELEGOO PETG HF US product page · checked 16 October 2026 · Printer source · Filament JSON
The P1S store comparison lists the P1P shell as an open frame, a stainless steel nozzle, a 300 °C maximum hot end, and a 100 °C maximum build plate.
The P1 series page describes a direct-drive extruder and multi-color printing with the AMS.
Questions
Can the Bambu Lab P1P reach the listed PETG HF nozzle temperature?
Nozzle temperature is not in our current sources.
Can the P1P reach the listed bed temperature?
Bed temperature is not in our current sources.
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.