Bambu Lab A1 mini
Bambu Lab A1 mini against 45 PLA+ products: 23 fit, 1 cannot reach the full recommended range, 0 cannot print this material at a recommended temperature, and 21 are missing an essential check. Manufacturer page checked 14 October 2026.
| Filament | Result | Why | Buy |
|---|---|---|---|
| Anycubic PLA Plus | Fits | A1 mini can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Creality Ender PLA+ | Fits | A1 mini can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ELEGOO PLA Plus | Fits | A1 mini can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| eSUN 3D ePLA+HS | Fits | A1 mini can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| eSUN 3D PLA+ | Fits | A1 mini can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| eSUN 3D PLA+ CMYK | Fits | A1 mini can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Inland PLA+ | Fits | A1 mini can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Overture PLA Plus | Fits | A1 mini can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3D Fuel Dual-Color Silk PLA+ | Fits | A1 mini can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3D Fuel Silk PLA+ | Fits | A1 mini can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3D Fuel Standard PLA+ | Fits | A1 mini can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3D Fuel Tough Pro PLA+ | Fits | A1 mini can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DEA PLA+ | Fits | A1 mini can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 4D-Lab PLA+ Plus | Fits | A1 mini can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Aceaddity Flash PLA+ (High Speed 600mm/s) | Fits | A1 mini can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Aceaddity PLA+ | Fits | A1 mini can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Alzament Hyper PLA+ | Fits | A1 mini can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Dancyn 3D Prints PLA+ High Speed | Fits | A1 mini can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fremover PLA+ High Speed | Fits | A1 mini can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| iBOSS 3D PLA+/Pro Silk Triple Red Blue Green | Fits | A1 mini can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Numakers PLA+ | Fits | A1 mini can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Patron EG PLA+ | Fits | A1 mini can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaValue PLA+ | Partial | The listed bed range reaches 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot reach the full recommended range. The low end, 75 °C (167 °F), is within that maximum. | |
| YooPai Matte PLA+ | Fits | A1 mini can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ELEGOO RAPID PLA Plus | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA+ | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA+ High-Speed | — | Nozzle temperature is not in our current sources. | |
| Inland High Speed PLA+ | — | Nozzle temperature is not in our current sources. | |
| JAYO PLA+ | — | Nozzle temperature is not in our current sources. | |
| SUNLU High Speed PLA+ | — | Nozzle temperature is not in our current sources. | |
| SUNLU PLA+ | — | Nozzle temperature is not in our current sources. | |
| SUNLU PLA+ 2.0 | — | Nozzle temperature is not in our current sources. | |
| SUNLU Silk PLA+ | — | Nozzle temperature is not in our current sources. | |
| SUNLU Silk PLA+ Dual-Color | — | Nozzle temperature is not in our current sources. | |
| SUNLU Silk PLA+ Four-Color | — | Nozzle temperature is not in our current sources. | |
| SUNLU Silk PLA+ Rainbow | — | Nozzle temperature is not in our current sources. | |
| SUNLU Silk PLA+ Tri-Color | — | Nozzle temperature is not in our current sources. | |
| Alzament PLA+ | — | Nozzle temperature is not in our current sources. | |
| GST3D Bright Pla+ Space | — | Nozzle temperature is not in our current sources. | |
| GST3D PLA+ | — | Nozzle temperature is not in our current sources. | |
| GST3D PLA+ Military | — | Nozzle temperature is not in our current sources. | |
| GST3D PLA+ SILK | — | Nozzle temperature is not in our current sources. | |
| GST3D PLA+ Special | — | Nozzle temperature is not in our current sources. | |
| Professional LAB PLA+ | — | Nozzle temperature is not in our current sources. | |
| SmartPrint PLA+ | — | Nozzle temperature is not in our current sources. |
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
Bambu Lab A1 mini against 45 PLA+ products: 23 fit, 1 cannot reach the full recommended range, 0 cannot print this material at a recommended temperature, and 21 are missing an essential check. Manufacturer page checked 14 October 2026.
Fits means the nozzle, bed, and enclosure checks all pass. Partial means the printer can print at the low end of a range but cannot reach the full recommended range, or the stock nozzle is not hardened. Outside limits means a recommended temperature starts above the printer maximum. A missing essential check is not a fit.
0 in the tray
Compare