Fits
Bambu Lab PLA Silk Dual Color on the A1 mini
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle210–240 °C (410–464 °F)
- Bed35–45 °C (95–113 °F)
- Speedup to 250 mm/s
- Dry55 °C (131 °F) for 8 h
- Density1.32 g/cm³
Print at 210–240 °C (410–464 °F) nozzle, 35–45 °C (95–113 °F) bed. Dry 8 h at 55 °C (131 °F) if it's been open. Listed speed up to 250 mm/s.
A1 mini maximums: nozzle 300 °C (572 °F), bed 80 °C (176 °F).
Sources & notes
Bambu Lab A1 mini with Bambu Lab PLA Silk Dual Color: A1 mini can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Bambu Lab PLA Silk Dual Color technical data sheet · checked 14 October 2026 · Printer source · Filament JSON
Bambu Lab lists a 300 °C maximum hot end temperature, an 80 °C maximum build plate temperature, and a stainless steel nozzle.
The FAQ says a hardened steel nozzle is required for carbon-fiber or glass-fiber filament and is not the pre-installed nozzle.
Enclosure is not stated on the specification table checked here.
Questions
Can the Bambu Lab A1 mini reach the listed PLA Silk Dual Color nozzle temperature?
The listed nozzle maximum of 240 °C (464 °F) is within this printer's maximum of 300 °C (572 °F).
Can the A1 mini reach the listed bed temperature?
The listed bed maximum of 45 °C (113 °F) is within this printer's maximum of 80 °C (176 °F).
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.