Anycubic PA6-CF
Published . Updated .
Print settings for Anycubic PA6-CF, copied from the maker's data.
Commission on these links. As an Amazon Associate we earn from qualifying purchases.
What to set
Set your slicer to
- Nozzle: 260–300 °C (500–572 °F).
- Bed: 40–110 °C (104–230 °F).
- Print speed: 50–100 mm/s.
- Enclosure: the maker lists one as required.
- Use a hardened nozzle.
Will it work on a printer?
Yes, it works means the nozzle, the bed, and an enclosure all clear that printer. Works with a caveat means the full recommended range is out of reach. A missing essential check is not a yes.
Works on 6 of 23 printers we track.
Colors
- Black#212322
Related
Where these numbers come from
Anycubic PA6-CF (PA/CF) lists 260–300 °C (500–572 °F) nozzle and 40–110 °C (104–230 °F) bed, from the Anycubic product page (https://store.anycubic.com/products/pa6-cf), checked 2026-10-26. The same check lists print speed 50–100 mm/s, drying 90–100 °C (194–212 °F) for 8–12 h, an enclosure is required, a hardened nozzle is required, listed price $38.99, not stored as a price per kilogram.
Manufacturer page checked 26 October 2026. This record is not from the Open Filament Database. Manufacturer page checked 26 October 2026.
Listed price $38.99 on the product page. Not recorded as a price per kilogram.
Full specifications
| Material | PA/CFSource material code PA6 |
|---|---|
| Nozzle temperature | 260–300 °C (500–572 °F) |
| Bed temperature | 40–110 °C (104–230 °F) |
| Print speed | 50–100 mm/sVolumetric flow was not on the source. |
| Volumetric flow | Not listed by the maker |
| Drying | 90–100 °C (194–212 °F) for 8–12 h |
| Enclosure required | Yes |
| Chamber temperature | Not listed by the maker |
| Hardened nozzle | YesThe product page says a hardened nozzle is required. |
| Spool weight | Not listed by the maker |
| Diameter | Not listed by the maker |
| Diameter tolerance | Not listed by the maker |
| Recorded density | 1.17 g/cm³ |
| Minimum nozzle diameter | 0.4 mm |
| Shore A hardness | Not listed by the maker |
| Certifications | Not listed by the maker |
| Price per kg | Not listed by the maker |
| Manufacturer page checked | 26 October 2026Anycubic product page |
Not listed by the maker means the source did not publish that figure.
Provenance
Anycubic product page
License Manufacturer product page. Record. Repository. Fields: nozzleTempC, bedTempC, speeds.printMmS, drying, densityGCm3, minNozzleDiameterMm, enclosure.required, hardenedNozzle, colors.