Outside limits
Prusament PEI on the SV08 Max
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle400–420 °C
- Bed140–160 °C
- Speed—
- Dry—
- Density1.27 g/cm³
Print at 400–420 °C nozzle, 140–160 °C bed.
SV08 Max maximums: nozzle 300 °C, bed 100 °C.
Sources & notes
Sovol SV08 Max with Prusament PEI: The listed nozzle temperature starts at 400 °C, above this printer's maximum of 300 °C. This printer cannot print this material at the recommended nozzle temperature.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Filament source · Printer source · Filament JSON
Sovol lists nozzle temperature ≤300 °C and hot bed temperature ≤100 °C, plus an optional chamber heating module and an enclosure kit.
Sovol's product note describes a dual-gear direct drive extruder. Nozzle alloy is not stated.
Questions
Can the Sovol SV08 Max reach the listed PEI nozzle temperature?
The listed nozzle temperature starts at 400 °C, above this printer's maximum of 300 °C. This printer cannot print this material at the recommended nozzle temperature.
Can the SV08 Max reach the listed bed temperature?
The listed bed temperature starts at 140 °C, above this printer's maximum of 100 °C. This printer cannot print this material at the recommended bed temperature.
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.