Fits

Bambu Lab Support for PA/PET on the SV08 Max

FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.

Print at 260–290 °C nozzle, 80–100 °C bed. Dry at 80 °C if it's been open. No drying time on the source.

Nozzle260–290 °C

Bed80–100 °C

Shared scale, 0–320 °C. A missing bar means that temperature is not in our current sources.

SV08 Max maximums: nozzle 300 °C, bed 100 °C.

Sources & notes

Sovol SV08 Max with Bambu Lab Support for PA/PET: SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it.

Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.

Sovol lists nozzle temperature ≤300 °C and hot bed temperature ≤100 °C, plus an optional chamber heating module and an enclosure kit.

Sovol's product note describes a dual-gear direct drive extruder. Nozzle alloy is not stated.

Questions

The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C.

The listed bed maximum of 100 °C is within this printer's maximum of 100 °C.

Whether an enclosure is required is not in our current sources.

A hardened nozzle is not recorded for this filament.