Bambu Lab ASA-CF on the SV08 Max
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle—
- Bed80–100 °C
- Speedup to 250 mm/s
- Dry80 °C for 8 h
- Density1.02 g/cm³
Bed 80–100 °C. No nozzle temperature on the source. Dry 8 h at 80 °C if it's been open. Listed speed up to 250 mm/s.
SV08 Max maximums: nozzle 300 °C, bed 100 °C.
Sources & notes
Sovol SV08 Max with Bambu Lab ASA-CF: Nozzle temperature is not in our current sources.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Bambu Lab ASA-CF technical data sheet · checked 14 October 2026 · Printer source · Filament JSON
Sovol lists nozzle temperature ≤300 °C and hot bed temperature ≤100 °C, plus an optional chamber heating module and an enclosure kit.
Sovol's product note describes a dual-gear direct drive extruder. Nozzle alloy is not stated.
Questions
Can the Sovol SV08 Max reach the listed ASA-CF nozzle temperature?
Nozzle temperature is not in our current sources.
Can the SV08 Max reach the listed bed temperature?
The listed bed maximum of 100 °C is within this printer's maximum of 100 °C.
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources.