Partial

Creality Hyper PA6-CF on the XL

FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.

Nozzle280–300 °C
Bed80 °C
Speed—
Dry80 °C maximum
Density1.25 g/cm³

Print at 280–300 °C nozzle, 80 °C bed. Dry at 80 °C if it's been open. No drying time on the source.

Nozzle280–300 °C

Bed80 °C

Shared scale, 0–320 °C. A missing bar means the manufacturer did not publish that temperature.

XL maximums: nozzle 290 °C, bed 120 °C.

Filament page · XL

Sources & notes

Prusa XL with Creality Hyper PA6-CF: The listed nozzle range reaches 300 °C, above this printer's maximum of 290 °C. This printer cannot reach the full recommended range. The low end, 280 °C, is within that maximum.

Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.

Filament source · Printer source · Filament JSON

The comparison table lists the XL at 290 °C / 120 °C with a brass nozzle and multi-material printing by up to five toolheads.

Chamber temperature is listed as 45 °C in the Enclosure, which is treated here as an optional enclosure rather than a stock enclosed chamber.

Questions

Can the Prusa XL reach the listed Hyper PA6-CF nozzle temperature?

The listed nozzle range reaches 300 °C, above this printer's maximum of 290 °C. This printer cannot reach the full recommended range. The low end, 280 °C, is within that maximum.

Can the XL reach the listed bed temperature?

The listed bed maximum of 80 °C is within this printer's maximum of 120 °C.

Is an enclosure required?

Whether an enclosure is required is not in our current sources.

Is a hardened nozzle recorded?

This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened.