Partial
Polymaker PC on the CORE One+
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle260–300 °C (500–572 °F)
- Bed100–120 °C (212–248 °F)
- Speed—
- Dry—
- Density1.2 g/cm³
Print at 260–300 °C (500–572 °F) nozzle, 100–120 °C (212–248 °F) bed.
CORE One+ maximums: nozzle 290 °C (554 °F), bed 120 °C (248 °F).
Sources & notes
Prusa CORE One+ with Polymaker PC: The listed nozzle range reaches 300 °C (572 °F), above this printer's maximum of 290 °C (554 °F). This printer cannot reach the full recommended range. The low end, 260 °C (500 °F), is within that maximum.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Filament source · Printer source · Filament JSON
Prusa lists a 290 °C maximum nozzle temperature, a 120 °C maximum heatbed temperature, a heated enclosed chamber, a brass CHT nozzle, and MMU3 support.
An HT hotend rated to 400 °C is described as coming soon. That figure is not the stock maximum.
Questions
Can the Prusa CORE One+ reach the listed PC nozzle temperature?
The listed nozzle range reaches 300 °C (572 °F), above this printer's maximum of 290 °C (554 °F). This printer cannot reach the full recommended range. The low end, 260 °C (500 °F), is within that maximum.
Can the CORE One+ reach the listed bed temperature?
The listed bed maximum of 120 °C (248 °F) is within this printer's maximum of 120 °C (248 °F).
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.