Bambu Lab PVA on the CORE One+
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle180–210 °C
- Bed50–60 °C
- Speedup to 200 mm/s
- Dry—
- Density1.27 g/cm³
Print at 180–210 °C nozzle, 50–60 °C bed. Listed speed up to 200 mm/s.
CORE One+ maximums: nozzle 290 °C, bed 120 °C.
Sources & notes
Prusa CORE One+ with Bambu Lab PVA: Whether an enclosure is required is not in our current sources.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Filament source · Printer source · Filament JSON
Prusa lists a 290 °C maximum nozzle temperature, a 120 °C maximum heatbed temperature, a heated enclosed chamber, a brass CHT nozzle, and MMU3 support.
An HT hotend rated to 400 °C is described as coming soon. That figure is not the stock maximum.
Questions
Can the Prusa CORE One+ reach the listed PVA nozzle temperature?
The listed nozzle maximum of 210 °C is within this printer's maximum of 290 °C.
Can the CORE One+ reach the listed bed temperature?
The listed bed maximum of 60 °C is within this printer's maximum of 120 °C.
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.