Outside limits

Prusament PEI on the Centauri Carbon

FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.

Nozzle400–420 °C
Bed140–160 °C
Speed—
Dry—
Density1.27 g/cm³

Print at 400–420 °C nozzle, 140–160 °C bed.

Nozzle400–420 °C

Bed140–160 °C

Shared scale, 0–320 °C. A missing bar means the manufacturer did not publish that temperature.

Centauri Carbon maximums: nozzle 320 °C, bed not in our current sources.

Filament page · Centauri Carbon

Sources & notes

Elegoo Centauri Carbon with Prusament PEI: The listed nozzle temperature starts at 400 °C, above this printer's maximum of 320 °C. This printer cannot print this material at the recommended nozzle temperature.

Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.

Filament source · Printer source · Filament JSON

Elegoo describes a 320 °C brass-hardened steel nozzle and a fully enclosed chamber.

The product page describes a heated bed and does not publish a maximum bed temperature, so that field is empty.

Questions

Can the Elegoo Centauri Carbon reach the listed PEI nozzle temperature?

The listed nozzle temperature starts at 400 °C, above this printer's maximum of 320 °C. This printer cannot print this material at the recommended nozzle temperature.

Can the Centauri Carbon reach the listed bed temperature?

This printer's maximum bed temperature is not in our current sources.

Is an enclosure required?

Whether an enclosure is required is not in our current sources.

Is a hardened nozzle recorded?

A hardened nozzle is not recorded for this filament.