Partial

Bambu Lab PPS-CF on the Centauri Carbon

FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.

Nozzle310–340 °C
Bed100–120 °C
Speedup to 100 mm/s
Dry—
Density1.26 g/cm³

Print at 310–340 °C nozzle, 100–120 °C bed. Listed speed up to 100 mm/s.

Nozzle310–340 °C

Bed100–120 °C

Shared scale, 0–320 °C. A missing bar means the manufacturer did not publish that temperature.

Centauri Carbon maximums: nozzle 320 °C, bed not in our current sources.

Filament page · Centauri Carbon

Sources & notes

Elegoo Centauri Carbon with Bambu Lab PPS-CF: The listed nozzle range reaches 340 °C, above this printer's maximum of 320 °C. This printer cannot reach the full recommended range. The low end, 310 °C, is within that maximum.

Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.

Bambu Lab PPS-CF technical data sheet · checked 14 October 2026 · Printer source · Filament JSON

Elegoo describes a 320 °C brass-hardened steel nozzle and a fully enclosed chamber.

The product page describes a heated bed and does not publish a maximum bed temperature, so that field is empty.

Questions

Can the Elegoo Centauri Carbon reach the listed PPS-CF nozzle temperature?

The listed nozzle range reaches 340 °C, above this printer's maximum of 320 °C. This printer cannot reach the full recommended range. The low end, 310 °C, is within that maximum.

Can the Centauri Carbon reach the listed bed temperature?

This printer's maximum bed temperature is not in our current sources.

Is an enclosure required?

Whether an enclosure is required is not in our current sources.

Is a hardened nozzle recorded?

This filament is recorded as needing a hardened nozzle. The stock nozzle is hardened.