Outside limits
Prusament PEI on the K1C
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle400–420 °C (752–788 °F)
- Bed140–160 °C (284–320 °F)
- Speed—
- Dry—
- Density1.27 g/cm³
Print at 400–420 °C (752–788 °F) nozzle, 140–160 °C (284–320 °F) bed.
K1C maximums: nozzle 300 °C (572 °F), bed 100 °C (212 °F).
Sources & notes
Creality K1C with Prusament PEI: The listed nozzle temperature starts at 400 °C (752 °F), above this printer's maximum of 300 °C (572 °F). This printer cannot print this material at the recommended nozzle temperature.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Filament source · Printer source · Filament JSON
Creality lists nozzle temperature ≤300 °C, heatbed temperature ≤100 °C, a dual-gear direct drive extruder, a hardened steel nozzle tip, and an enclosed design with a glass door.
Questions
Can the Creality K1C reach the listed PEI nozzle temperature?
The listed nozzle temperature starts at 400 °C (752 °F), above this printer's maximum of 300 °C (572 °F). This printer cannot print this material at the recommended nozzle temperature.
Can the K1C reach the listed bed temperature?
The listed bed temperature starts at 140 °C (284 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot print this material at the recommended bed temperature.
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.