Fits
Eryone TPU Rainbow on the Ender-3 V3 Neo
Nozzle, Bed, Speed. Source: Eryone product page · Last checked 19 October 2026
Source: Creality product page · Last checked 19 October 2026
How we verify: a figure is copied from a named source, and a missing figure stays blank. Methodology.
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle200–220 °C(392–428 °F)
- Bed0–60 °C(32–140 °F)
- Speed15–40 mm/s
- Dry—
- Density1.25 g/cm³
Nozzle, Bed, Speed. Source: Eryone product page · Last checked 19 October 2026
Compatibility
- The listed nozzle maximum of 220 °C (428 °F) is within this printer's maximum of 300 °C (572 °F).
- The listed bed maximum of 60 °C (140 °F) is within this printer's maximum of 100 °C (212 °F).
- Whether an enclosure is required is not in our current sources.
- A hardened nozzle is not recorded for this filament.
Related answers
- Can I print TPU on a Bambu/direct drive vs bowden printer?
- What is the best flexible filament, and how do I print TPU?
- Do I need to dry filament, and how?
- What filament should I use when the part has to bend?
Ender-3 V3 Neo maximums: nozzle 300 °C (572 °F), bed 100 °C (212 °F).
Filament page · Ender-3 V3 Neo
Sources & notes
Creality Ender-3 V3 Neo with Eryone TPU Rainbow: Ender-3 V3 Neo can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it.
Dataset imported 13 October 2026. Manufacturer page checked 19 October 2026.
Eryone product page · checked 19 October 2026 · Printer source · Filament JSON
The specification table lists nozzle temperature ≤300 °C, heatbed temperature ≤100 °C, a 220 × 220 × 220 mm build volume, and printing speed ≤500 mm/s.
The extruder is listed as Sprite 2 Extruder. The page does not call it direct drive, and it does not state a nozzle alloy, so those fields are empty.
Filament compatibility is recommended PLA, PETG, and TPU (90A TPU or harder), and supported ABS and ASA with an enclosure recommended. Auto filament refill and identification are listed as yes with CFS nano. The page does not say the printer itself is enclosed.
Questions
Can the Creality Ender-3 V3 Neo reach the listed TPU Rainbow nozzle temperature?
The listed nozzle maximum of 220 °C (428 °F) is within this printer's maximum of 300 °C (572 °F).
Can the Ender-3 V3 Neo reach the listed bed temperature?
The listed bed maximum of 60 °C (140 °F) is within this printer's maximum of 100 °C (212 °F).
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.