Partial
Bambu Lab ABS on the Ender-3 V3 Neo
Drying, drying.hours. Source: Bambu Lab TDS · Last checked 18 October 2026
Speed. Source: Bambu Lab TDS · Last checked 18 October 2026
Source: Creality product page · Last checked 19 October 2026
How we verify: a figure is copied from a named source, and a missing figure stays blank. Methodology.
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle230–260 °C(446–500 °F)
- Bed90–110 °C(194–230 °F)
- Speedup to 300 mm/s
- Dry80 °C(176 °F)for 8 hManufacturer drying table →
- Density1.05 g/cm³
Speed, Drying. Source: Bambu Lab TDS · Last checked 18 October 2026
Compatibility
- The listed nozzle maximum of 260 °C (500 °F) is within this printer's maximum of 300 °C (572 °F).
- The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum.
- Whether an enclosure is required is not in our current sources.
- A hardened nozzle is not recorded for this filament.
Related answers
- Are ABS/ASA fumes dangerous, and do I need ventilation?
- How do I print ABS successfully?
- How do I fix bed adhesion problems?
- What filament should I use for heat?
Ender-3 V3 Neo maximums: nozzle 300 °C (572 °F), bed 100 °C (212 °F).
Filament page · Ender-3 V3 Neo
Sources & notes
Creality Ender-3 V3 Neo with Bambu Lab ABS: The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum.
Dataset imported 13 October 2026. Manufacturer page checked 19 October 2026.
Filament source · Printer source · Filament JSON
The specification table lists nozzle temperature ≤300 °C, heatbed temperature ≤100 °C, a 220 × 220 × 220 mm build volume, and printing speed ≤500 mm/s.
The extruder is listed as Sprite 2 Extruder. The page does not call it direct drive, and it does not state a nozzle alloy, so those fields are empty.
Filament compatibility is recommended PLA, PETG, and TPU (90A TPU or harder), and supported ABS and ASA with an enclosure recommended. Auto filament refill and identification are listed as yes with CFS nano. The page does not say the printer itself is enclosed.
Questions
Can the Creality Ender-3 V3 Neo reach the listed ABS nozzle temperature?
The listed nozzle maximum of 260 °C (500 °F) is within this printer's maximum of 300 °C (572 °F).
Can the Ender-3 V3 Neo reach the listed bed temperature?
The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum.
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.