Eryone ASA Light-Weight on the Ender-3 V3 Mega
Bed, Speed, Drying. Source: Eryone product page · Last checked 19 October 2026
Source: Creality product page · Last checked 19 October 2026
How we verify: a figure is copied from a named source, and a missing figure stays blank. Methodology.
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle—
- Bed80–100 °C(176–212 °F)
- Speed30–100 mm/s
- Dry80–90 °C(176–194 °F)for 10 h
- Density0.99 g/cm³
Bed, Speed, Drying. Source: Eryone product page · Last checked 19 October 2026
Compatibility
- Nozzle temperature is not in our current sources.
- The listed bed maximum of 100 °C (212 °F) is within this printer's maximum of 100 °C (212 °F).
- Whether an enclosure is required is not in our current sources.
- A hardened nozzle is not recorded for this filament.
Related answers
- What is the best filament for outdoor use?
- What filament should I use for heat?
- Are ABS/ASA fumes dangerous, and do I need ventilation?
Ender-3 V3 Mega maximums: nozzle 300 °C (572 °F), bed 100 °C (212 °F).
Filament page · Ender-3 V3 Mega
Sources & notes
Creality Ender-3 V3 Mega with Eryone ASA Light-Weight: Nozzle temperature is not in our current sources.
Dataset imported 13 October 2026. Manufacturer page checked 19 October 2026.
Eryone product page · checked 19 October 2026 · Printer source · Filament JSON
The product page lists nozzle temperature ≤300 °C, heatbed temperature ≤100 °C, a direct drive extruder, and a 420 × 420 × 420 mm build volume.
Typical printing speed is 300 mm/s and max printing speed is 500 mm/s. CFS compatibility is listed as CFS and CFS nano.
Recommended filaments are PLA, PETG, and TPU (85A–95A). Compatible filaments are ABS and ASA, with an enclosure recommended. The page does not say this printer is enclosed, and it does not state a nozzle alloy.
Questions
Can the Creality Ender-3 V3 Mega reach the listed ASA Light-Weight nozzle temperature?
Nozzle temperature is not in our current sources.
Can the Ender-3 V3 Mega reach the listed bed temperature?
The listed bed maximum of 100 °C (212 °F) is within this printer's maximum of 100 °C (212 °F).
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.