Bambu Lab PAHT-CF on the Ender-3 V3 Mega
Drying, drying.hours. Source: Bambu Lab TDS · Last checked 15 October 2026
Nozzle, Bed, Speed. Source: Bambu Lab TDS · Last checked 15 October 2026
Source: Creality product page · Last checked 19 October 2026
How we verify: a figure is copied from a named source, and a missing figure stays blank. Methodology.
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle260–290 °C(500–554 °F)
- Bed80–100 °C(176–212 °F)
- Speedup to 100 mm/s
- Dry80 °C(176 °F)for 12 hManufacturer drying table →
- Density1.06 g/cm³
Nozzle, Bed, Speed, Drying. Source: Bambu Lab TDS · Last checked 15 October 2026
Compatibility
- The listed nozzle maximum of 290 °C (554 °F) is within this printer's maximum of 300 °C (572 °F).
- The listed bed maximum of 100 °C (212 °F) is within this printer's maximum of 100 °C (212 °F).
- Whether an enclosure is required is not in our current sources.
- This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources.
Related answers
- Which nozzle (brass, hardened, 0.6mm) should I use for which filament?
- How do I print nylon, and is it worth it?
- Are carbon fiber filaments worth it, and do I need a hardened nozzle?
- Do I need to dry filament, and how?
Ender-3 V3 Mega maximums: nozzle 300 °C (572 °F), bed 100 °C (212 °F).
Filament page · Ender-3 V3 Mega
Sources & notes
Creality Ender-3 V3 Mega with Bambu Lab PAHT-CF: This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources.
Dataset imported 13 October 2026. Manufacturer page checked 19 October 2026.
Bambu Lab PAHT-CF technical data sheet · checked 15 October 2026 · Printer source · Filament JSON
The product page lists nozzle temperature ≤300 °C, heatbed temperature ≤100 °C, a direct drive extruder, and a 420 × 420 × 420 mm build volume.
Typical printing speed is 300 mm/s and max printing speed is 500 mm/s. CFS compatibility is listed as CFS and CFS nano.
Recommended filaments are PLA, PETG, and TPU (85A–95A). Compatible filaments are ABS and ASA, with an enclosure recommended. The page does not say this printer is enclosed, and it does not state a nozzle alloy.
Questions
Can the Creality Ender-3 V3 Mega reach the listed PAHT-CF nozzle temperature?
The listed nozzle maximum of 290 °C (554 °F) is within this printer's maximum of 300 °C (572 °F).
Can the Ender-3 V3 Mega reach the listed bed temperature?
The listed bed maximum of 100 °C (212 °F) is within this printer's maximum of 100 °C (212 °F).
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources.