Fits
Anycubic TPU on the Ender-3 V3 Mega
Drying, drying.hours. Source: Anycubic TDS · Last checked 15 October 2026
Nozzle, Bed. Source: Anycubic TDS · Last checked 15 October 2026
Source: Creality product page · Last checked 19 October 2026
How we verify: a figure is copied from a named source, and a missing figure stays blank. Methodology.
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle195–230 °C(383–446 °F)
- Bed50–60 °C(122–140 °F)
- Speed—
- Dry70–80 °C(158–176 °F)for 12 hManufacturer drying table →
- Density1.23 g/cm³
Nozzle, Bed, Drying. Source: Anycubic TDS · Last checked 15 October 2026
Compatibility
- The listed nozzle maximum of 230 °C (446 °F) is within this printer's maximum of 300 °C (572 °F).
- The listed bed maximum of 60 °C (140 °F) is within this printer's maximum of 100 °C (212 °F).
- Whether an enclosure is required is not in our current sources.
- A hardened nozzle is not recorded for this filament.
Related answers
- Can I print TPU on a Bambu/direct drive vs bowden printer?
- What is the best flexible filament, and how do I print TPU?
- Do I need to dry filament, and how?
- What filament should I use when the part has to bend?
Ender-3 V3 Mega maximums: nozzle 300 °C (572 °F), bed 100 °C (212 °F).
Filament page · Ender-3 V3 Mega
Sources & notes
Creality Ender-3 V3 Mega with Anycubic TPU: Ender-3 V3 Mega can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it.
Dataset imported 13 October 2026. Manufacturer page checked 19 October 2026.
Anycubic TPU technical data sheet · checked 15 October 2026 · Printer source · Filament JSON
The product page lists nozzle temperature ≤300 °C, heatbed temperature ≤100 °C, a direct drive extruder, and a 420 × 420 × 420 mm build volume.
Typical printing speed is 300 mm/s and max printing speed is 500 mm/s. CFS compatibility is listed as CFS and CFS nano.
Recommended filaments are PLA, PETG, and TPU (85A–95A). Compatible filaments are ABS and ASA, with an enclosure recommended. The page does not say this printer is enclosed, and it does not state a nozzle alloy.
Questions
Can the Creality Ender-3 V3 Mega reach the listed TPU nozzle temperature?
The listed nozzle maximum of 230 °C (446 °F) is within this printer's maximum of 300 °C (572 °F).
Can the Ender-3 V3 Mega reach the listed bed temperature?
The listed bed maximum of 60 °C (140 °F) is within this printer's maximum of 100 °C (212 °F).
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.