Outside limits
Bambu Lab PPS-CF on the X2D
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle310–340 °C (590–644 °F)
- Bed100–120 °C (212–248 °F)
- Speedup to 100 mm/s
- Dry—
- Density1.26 g/cm³
Print at 310–340 °C (590–644 °F) nozzle, 100–120 °C (212–248 °F) bed. Listed speed up to 100 mm/s.
X2D maximums: nozzle 300 °C (572 °F), bed 120 °C (248 °F).
Sources & notes
Bambu Lab X2D with Bambu Lab PPS-CF: The listed nozzle temperature starts at 310 °C (590 °F), above this printer's maximum of 300 °C (572 °F). This printer cannot print this material at the recommended nozzle temperature.
Dataset imported 13 October 2026. Manufacturer page checked 15 October 2026.
Bambu Lab PPS-CF technical data sheet · checked 14 October 2026 · Printer source · Filament JSON
The X2D technical specifications list a hardened steel nozzle, a 300 °C maximum nozzle temperature, and a 120 °C maximum heatbed temperature.
The same table lists a door sensor and an outer frame of plastic, glass, and metal. The X2D product comparison labels the machine enclosed.
Filament odometry is listed as supported with AMS. The specification does not say an AMS unit is included, and it does not name the extruder direct drive.
Questions
Can the Bambu Lab X2D reach the listed PPS-CF nozzle temperature?
The listed nozzle temperature starts at 310 °C (590 °F), above this printer's maximum of 300 °C (572 °F). This printer cannot print this material at the recommended nozzle temperature.
Can the X2D reach the listed bed temperature?
The listed bed maximum of 120 °C (248 °F) is within this printer's maximum of 120 °C (248 °F).
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
This filament is recorded as needing a hardened nozzle. The stock nozzle is hardened.