Fits
Bambu Lab Support For PLA on the P1P
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle220–230 °C (428–446 °F)
- Bed35–45 °C (95–113 °F)
- Speedup to 200 mm/s
- Dry55 °C (131 °F) maximum
- Density1.33 g/cm³
Print at 220–230 °C (428–446 °F) nozzle, 35–45 °C (95–113 °F) bed. Dry at 55 °C (131 °F) if it's been open. No drying time on the source. Listed speed up to 200 mm/s.
P1P maximums: nozzle 300 °C (572 °F), bed 100 °C (212 °F).
Sources & notes
Bambu Lab P1P with Bambu Lab Support for PLA: P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Bambu Lab Support for PLA technical data sheet · checked 15 October 2026 · Printer source · Filament JSON
The P1S store comparison lists the P1P shell as an open frame, a stainless steel nozzle, a 300 °C maximum hot end, and a 100 °C maximum build plate.
The P1 series page describes a direct-drive extruder and multi-color printing with the AMS.
Questions
Can the Bambu Lab P1P reach the listed Support For PLA nozzle temperature?
The listed nozzle maximum of 230 °C (446 °F) is within this printer's maximum of 300 °C (572 °F).
Can the P1P reach the listed bed temperature?
The listed bed maximum of 45 °C (113 °F) is within this printer's maximum of 100 °C (212 °F).
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.