Outside limits
Bambu Lab PPA-CF on the A1
As an Amazon Associate we earn from qualifying purchases.
A1 needs a hardened nozzle for this filament.
- Nozzle—
- Bed100–120 °C
- Speedup to 100 mm/s
- Dry—
- Density1.25 g/cm³
A1 maximums: nozzle 300 °C, bed 100 °C.
Sources & notes
Bambu Lab A1 with Bambu Lab PPA-CF: Nozzle temperature is not listed for this filament. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened.
Filament dataset verified date 13 October 2026. Printer source checked 14 October 2026.
Bambu Lab PPA-CF technical data sheet · checked 14 October 2026 · Printer source · Filament JSON
The A1 FAQ states a maximum hotend temperature of 300 °C and a maximum heatbed temperature of 100 °C.
The same FAQ says the printer is pre-installed with a 0.4 mm stainless steel nozzle. Hardened steel nozzles are sold separately.
The FAQ does not call the frame open or enclosed, so enclosure is left empty.
Questions
Can the Bambu Lab A1 reach the listed PPA-CF nozzle temperature?
Nozzle temperature is not listed for this filament.
Can the A1 reach the listed bed temperature?
The listed bed range reaches 120 °C, above this printer's maximum of 100 °C.
Is an enclosure required?
Enclosure required is not listed for this filament.
Is a hardened nozzle recorded?
A hardened nozzle is recorded for this filament. The stock nozzle is not hardened.