Incomplete
eSUN 3D PA6 PA on the A1 mini
Not enough published numbers to say if A1 mini can print this.
- NozzleNot listed
- BedNot listed
- SpeedNot listed
- Dry—
- Density1.12 g/cm³
A1 mini maximums: nozzle 300 °C, bed 80 °C.
Sources & notes
Bambu Lab A1 mini with eSUN 3D PA6 PA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.
Filament dataset verified date 13 October 2026. Printer source checked 14 October 2026.
Filament source · Printer source · Filament JSON
Bambu Lab lists a 300 °C maximum hot end temperature, an 80 °C maximum build plate temperature, and a stainless steel nozzle.
The FAQ says a hardened steel nozzle is required for carbon-fiber or glass-fiber filament and is not the pre-installed nozzle.
Enclosure is not stated on the specification table checked here.
Questions
Can the Bambu Lab A1 mini reach the listed PA6 PA nozzle temperature?
Nozzle temperature is not listed for this filament.
Can the A1 mini reach the listed bed temperature?
Bed temperature is not listed for this filament.
Is an enclosure required?
Enclosure required is not listed for this filament.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.