Outside limits
Bambu Lab PPS-CF on the Kobra 3 Max
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle310–340 °C
- Bed100–120 °C
- Speedup to 100 mm/s
- Dry—
- Density1.26 g/cm³
Print at 310–340 °C nozzle, 100–120 °C bed. Listed speed up to 100 mm/s.
Kobra 3 Max maximums: nozzle 300 °C, bed 90 °C.
Sources & notes
Anycubic Kobra 3 Max with Bambu Lab PPS-CF: The listed nozzle temperature starts at 310 °C, above this printer's maximum of 300 °C. This printer cannot print this material at the recommended nozzle temperature.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Bambu Lab PPS-CF technical data sheet · checked 14 October 2026 · Printer source · Filament JSON
The quick start lists a 300 °C maximum nozzle temperature and a 90 °C maximum heatbed temperature. The Combo includes the ACE Pro.
The FAQ recommends setting up a warm chamber for ABS, so the stock printer is recorded as open. Nozzle alloy and drive type are not stated.
Questions
Can the Anycubic Kobra 3 Max reach the listed PPS-CF nozzle temperature?
The listed nozzle temperature starts at 310 °C, above this printer's maximum of 300 °C. This printer cannot print this material at the recommended nozzle temperature.
Can the Kobra 3 Max reach the listed bed temperature?
The listed bed temperature starts at 100 °C, above this printer's maximum of 90 °C. This printer cannot print this material at the recommended bed temperature.
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources.