# Can the Prusa CORE One+ (Gen 2) INDX print TPU? Yes, it works with 153 of the 180 TPU filaments we track

Yes, it works with 153 of the 180 TPU filaments we track. Most TPU prints between 210 and 240 °C (410–464 °F); listed products range from 190 to 270 °C (374–518 °F). 158 of 180 listed TPU products list a nozzle temperature. Bed temperatures on 153 of 180 are 0–90 °C (32–194 °F). Listed speeds on 24 of 180 are 15–500 mm/s. Drying temperatures on 38 of 180 are 50–80 °C (122–176 °F). TPU settings for the Prusa CORE One+ (Gen 2) INDX. These are the spans of the listed products, not one printer preset.

Prusa CORE One+ (Gen 2) INDX against 180 TPU products: 153 fit, 0 cannot reach the full recommended range, 0 cannot print this material at a recommended temperature, and 27 are missing an essential check. Manufacturer page checked 27 October 2026.

Fits means the nozzle, bed, and enclosure checks all pass. A missing essential check is not a fit. Temperatures are not estimated.

- Printer: https://filamentfacts.com/printer/prusa-core-one-plus-indx
- Material: https://filamentfacts.com/material/tpu
- HTML: https://filamentfacts.com/printer/prusa-core-one-plus-indx/tpu