# Can the Prusa CORE One+ (Gen 2) INDX print PLA? Yes, it works with 732 of the 885 PLA filaments we track

Yes, it works with 732 of the 885 PLA filaments we track. Most PLA prints between 190 and 230 °C (374–446 °F); listed products range from 180 to 275 °C (356–527 °F). 745 of 885 listed PLA products list a nozzle temperature. Bed temperatures on 734 of 885 are 0–80 °C (32–176 °F). Listed speeds on 104 of 885 are 20–600 mm/s. Drying temperatures on 251 of 885 are 40–245 °C (104–473 °F). PLA settings for the Prusa CORE One+ (Gen 2) INDX. These are the spans of the listed products, not one printer preset.

Prusa CORE One+ (Gen 2) INDX against 885 PLA products: 732 fit, 0 cannot reach the full recommended range, 0 cannot print this material at a recommended temperature, and 153 are missing an essential check. Manufacturer page checked 27 October 2026.

Fits means the nozzle, bed, and enclosure checks all pass. A missing essential check is not a fit. Temperatures are not estimated.

- Printer: https://filamentfacts.com/printer/prusa-core-one-plus-indx
- Material: https://filamentfacts.com/material/pla
- HTML: https://filamentfacts.com/printer/prusa-core-one-plus-indx/pla