# Overture High Speed PLA print settings on the Bambu Lab X1 Carbon

Whether an enclosure is required is not in our current sources.

Print at 190–220 °C nozzle, 25–60 °C bed. Dry 7 h at 50 °C if it's been open. Listed speed up to 300 mm/s.

## Sources & notes

Bambu Lab X1 Carbon with Overture High Speed PLA: Whether an enclosure is required is not in our current sources.

Source: https://overture3d.com/products/overture-pla
Manufacturer page checked: 2026-10-14