# Bambu Lab P2S

The Bambu Lab P2S lists a maximum nozzle temperature of 300 °C (572 °F) and lists a maximum bed temperature of 110 °C (230 °F), according to https://bambulab.com/en/p2s/specs. Manufacturer page checked 2026-10-15.

Checked 2026-10-15.

- Maximum nozzle: 300
- Maximum bed: 110
- Enclosure: enclosed
- Stock nozzle hardened: yes
- Direct drive: not in our current sources
- AMS or MMU: AMS

The P2S technical specifications list a hardened steel nozzle, a 300 °C maximum nozzle temperature, and a 110 °C maximum heatbed temperature.

The product page describes printing with the door closed, a shatter-safe front glass, and a chamber that seals heat. The X2D comparison labels the P2S enclosed.

The product page also says the chamber is ready at 50 °C. That is chamber air, not the heatbed maximum stored here.

Filament odometry on the specification is supported with AMS. The page does not say an AMS is in the box, and it does not name the extruder direct drive.

- [P2S technical specifications](https://bambulab.com/en/p2s/specs)
- [P2S product page](https://bambulab.com/en/p2s)