# Polymaker Polylite PLA print settings on the Bambu Lab P1S

Whether an enclosure is required is not in our current sources.

Print at 190–230 °C nozzle, 25–60 °C bed. Dry 6 h at 55 °C if it's been open. Listed speed 40–60 mm/s.

## Sources & notes

Bambu Lab P1S with Polymaker Polylite PLA: Whether an enclosure is required is not in our current sources.

Source: https://us.polymaker.com/products/polylite-pla
Manufacturer page checked: 2026-10-14