# ELEGOO PLA Basic print settings on the Bambu Lab P1S

Whether an enclosure is required is not in our current sources.

Print at 190–230 °C nozzle, 35–65 °C bed. Dry 8 h at 50 °C if it's been open. Listed speed up to 270 mm/s.

## Sources & notes

Bambu Lab P1S with ELEGOO PLA Basic: Whether an enclosure is required is not in our current sources.

Source: https://us.elegoo.com/products/pla-basic-filament-1-75-mm-colored-10kg
Manufacturer page checked: 2026-10-14