{
  "printer": "bambu-lab-p1s",
  "filament": "elegoo/pla-basic",
  "answer": "Print at 190–230 °C nozzle, 35–65 °C bed. Dry 8 h at 50 °C if it's been open. Listed speed up to 270 mm/s.",
  "summary": "Whether an enclosure is required is not in our current sources.",
  "fit": "Bambu Lab P1S with ELEGOO PLA Basic: Whether an enclosure is required is not in our current sources.",
  "nozzle": "190–230 °C",
  "bed": "35–65 °C",
  "dry": "50 °C for 8 h",
  "printSpeed": "up to 270 mm/s",
  "sourceUrl": "https://us.elegoo.com/products/pla-basic-filament-1-75-mm-colored-10kg",
  "verifiedAt": "2026-10-14"
}