# Filament heat resistance

HDT values are only comparable when the load and standard match. Rows that do not state a load are shown and marked load not stated.

Values copied only from the manufacturer product page or TDS. Blank means the page did not state that figure. HDT load is never inferred. HDT values are only comparable when the load and standard match.

Checked 20 October 2026. 36 rows.

- PrimaCreator ASA (ASA): HDT 94 °C (201 °F) (ISO 75, load not stated). https://primacreator.com/products/primaselect-asa
- PrimaCreator Flame Retardant PrimaSelect PLA (PLA): HDT 55 °C (131 °F) (ISO 75, load not stated). https://primacreator.com/products/primaselect-pla-flame-retardant
- PrimaCreator Gradient PrimaSelect PLA (PLA): HDT 53 °C (127 °F) (ISO 75, load not stated). https://primacreator.com/products/primaselect-pla-gradient
- PrimaCreator Marble PrimaSelect PLA (PLA): HDT 59 °C (138 °F) (ISO 75, load not stated). https://primacreator.com/products/primaselect-pla-marble
- PrimaCreator Metal Shine PrimaSelect PLA (PLA): HDT 58 °C (136 °F) (ISO 75, load not stated). https://primacreator.com/products/primaselect-pla-metal-shine
- PrimaCreator Pastel PrimaSelect PLA (PLA): HDT 58 °C (136 °F) (ISO 75, load not stated). https://primacreator.com/products/primaselect-pla-pastel
- PrimaCreator PC CF (PC): HDT 102 °C (216 °F) (ISO 75, load not stated). https://primacreator.com/products/primaselect-pc-cf
- PrimaCreator PC (PC): HDT 107 °C (225 °F) (ISO 75, load not stated). https://primacreator.com/products/primaselect-pc
- PrimaCreator PLA CF (PLA): HDT 55 °C (131 °F) (ISO 75, load not stated). https://primacreator.com/products/primaselect-pla-cf
- PrimaCreator Primaselect ABS (ABS): HDT not stated. https://primacreator.com/products/primaselect-abs
- PrimaCreator Primaselect PC CF (PC): HDT 102 °C (216 °F) (ISO 75, load not stated). https://primacreator.com/products/primaselect-pc-cf
- PrimaCreator Primaselect PC (PC): HDT 107 °C (225 °F) (ISO 75, load not stated). https://primacreator.com/products/primaselect-pc
- PrimaCreator Primaselect PETG (PETG): HDT 69 °C (156 °F) (ISO 75, load not stated). https://primacreator.com/products/primaselect-petg
- PrimaCreator Primaselect PLA CF (PLA): HDT 55 °C (131 °F) (ISO 75, load not stated). https://primacreator.com/products/primaselect-pla-cf
- PrimaCreator Primaselect PLA (PLA): HDT 57 °C (135 °F) (ISO 75, load not stated). https://primacreator.com/products/primaselect-pla
- PrimaCreator Primaselect PVA (PVA): HDT not stated. https://primacreator.com/products/primaselect-pva
- PrimaCreator PVA (PVA): HDT not stated. https://primacreator.com/products/primaselect-pva
- PrimaCreator Satin PrimaSelect PLA (PLA): HDT 53 °C (127 °F) (ISO 75, load not stated). https://primacreator.com/products/primaselect-pla-satin
- PrimaCreator Sparkle PrimaSelect PLA (PLA): HDT 59 °C (138 °F) (ISO 75, load not stated). https://primacreator.com/products/primaselect-pla-sparkle
- QIDI Tech ABS Metal Rapido (ABS): HDT 75 °C (167 °F) (load not stated). https://us.qidi3d.com/products/abs-rapido-metal-filament
- QIDI Tech PA12-CF (PA12): HDT 78.4 °C (173 °F) (load not stated). https://us.qidi3d.com/products/qidi-carbon-fiber-filament-pa12-cf
- QIDI Tech PAHT-GF (PPA): HDT 80 °C (176 °F) (load not stated). https://us.qidi3d.com/products/paht-gf-filament
- QIDI Tech PC/ABS-FR (PC): HDT 102 °C (216 °F) (load not stated). https://us.qidi3d.com/products/qidi-tech-pc-abs-fr-filament
- QIDI Tech PETG Basic (PETG): HDT 71.8 °C (161 °F) (load not stated). https://us.qidi3d.com/products/petg-basic
- QIDI Tech PETG-CF (PETG): HDT 77 °C (171 °F) (load not stated). https://us.qidi3d.com/products/petg-cf
- QIDI Tech PETG-GF (PETG): HDT 76 °C (169 °F) (load not stated). https://us.qidi3d.com/products/petg-gf
- QIDI Tech PETG Rapido (PETG): HDT 70 °C (158 °F) (load not stated). https://us.qidi3d.com/products/petg-rapido
- QIDI Tech PETG Translucent (PETG): HDT 71.8 °C (161 °F) (load not stated). https://us.qidi3d.com/products/petg-translucent
- QIDI Tech PLA Basic (PLA): HDT 57.6 °C (136 °F) (load not stated). https://us.qidi3d.com/products/pla-basic
- QIDI Tech PLA Matte Basic (PLA): HDT 57 °C (135 °F) (load not stated). https://us.qidi3d.com/products/pla-matte-basic
- QIDI Tech PLA Metal Rapido (PLA): HDT 58 °C (136 °F) (load not stated). https://us.qidi3d.com/products/pla-rapido-metal-filament
- QIDI Tech PLA Wood (PLA): HDT 57 °C (135 °F) (load not stated). https://us.qidi3d.com/products/pla-wood-filament
- QIDI Tech PPS-CF (PPS): HDT 242.7 °C (469 °F) (load not stated). https://us.qidi3d.com/products/pps-cf-filament
- QIDI Tech PPS-GF20 (PPS): HDT 236.3 °C (457 °F) (load not stated). https://us.qidi3d.com/products/pps-gf20
- QIDI Tech UltraPA-CF25 (PPA): HDT 196.9 °C (386 °F) (load not stated). https://us.qidi3d.com/products/ultrapa-cf25-filament
- QIDI Tech UltraPA (PPA): HDT 72.5 °C (163 °F) (load not stated). https://us.qidi3d.com/products/qidi-nylon-filament-ultrapa