# Snapmaker PLA Full Spectrum White Edition: 190–230 °C (374–446 °F)

Snapmaker PLA Full Spectrum White Edition prints at 190–230 °C (374–446 °F) nozzle and 25–70 °C (77–158 °F) bed, per Snapmaker product page.

Print at 190–230 °C (374–446 °F) nozzle, 25–70 °C (77–158 °F) bed. Dry 6 h at 55 °C (131 °F) if it's been open. Listed speed up to 250 mm/s.

Those settings follow the Snapmaker product page. Where an older database figure disagrees, the note is under Sources & notes.

## Sources & notes

Snapmaker PLA Full Spectrum White Edition (PLA) lists a recommended nozzle temperature of 190–230 °C (374–446 °F) and a recommended bed temperature of 25–70 °C (77–158 °F), a print speed of up to 250 mm/s, and pre-drying at 55 °C (131 °F) for 6 hours, on the Snapmaker US product page (https://us.snapmaker.com/products/pla-full-spectrum-filament-bundle-white-edition-4kg; page title “PLA Full Spectrum Filament Bundle (White Edition) (RFID) - 4kg”), checked 2026-10-26. The same page lists density 1.238 ± 0.002 g/cm³, filament diameter 1.75 mm ± 0.03 mm, and four 1 kg spools. It lists a price of $69.99 for the 4 kg bundle (compare-at $89.00, SKU 34044), which is not a price per kilogram. Hotends of 0.4 mm or smaller are recommended.

Manufacturer page checked: 2026-10-26. Not an Open Filament Database record.

- Material: PLA
- Nozzle: 190–230 °C (374–446 °F)
- Bed: 25–70 °C (77–158 °F)
- Dry: 55 °C (131 °F) for 6 h
- Print speed: up to 250 mm/s
- Hardened nozzle: not recorded
- Source: https://us.snapmaker.com/products/pla-full-spectrum-filament-bundle-white-edition-4kg

## What nozzle temperature does Snapmaker PLA Full Spectrum White Edition recommend?

Snapmaker PLA Full Spectrum White Edition lists a recommended nozzle temperature of 190–230 °C (374–446 °F) on the Snapmaker US product page.

## What bed temperature does Snapmaker PLA Full Spectrum White Edition recommend?

Snapmaker PLA Full Spectrum White Edition lists a recommended bed temperature of 25–70 °C (77–158 °F) on the Snapmaker US product page.

## What print speed does Snapmaker PLA Full Spectrum White Edition list?

Snapmaker PLA Full Spectrum White Edition lists a print speed of up to 250 mm/s on the Snapmaker US product page.

## Does Snapmaker PLA Full Spectrum White Edition require an enclosure?

An enclosure requirement is not in our current sources.

## Does Snapmaker PLA Full Spectrum White Edition require a hardened nozzle?

A hardened-nozzle requirement is not in our current sources.

## How should Snapmaker PLA Full Spectrum White Edition be dried?

Snapmaker PLA Full Spectrum White Edition lists pre-drying at 55 °C (131 °F) for 6 hours. The same page says the filament generally does not require drying.

## What spool weights does Snapmaker PLA Full Spectrum White Edition come in?

The bundle contains four 1 kg spools.

## What is the price per kilogram of Snapmaker PLA Full Spectrum White Edition?

Price per kilogram is not in our current sources. The Snapmaker US product page lists $69.99 for the 4 kg bundle.