# Prusament PETG Ultraglow print settings (nozzle, bed, dry)

Prusament PETG Ultraglow prints at 250–270 °C (482–518 °F) nozzle and 75–95 °C (167–203 °F) bed, per Prusa product page.

Print at 250–270 °C (482–518 °F) nozzle, 75–95 °C (167–203 °F) bed.

Those settings follow the Prusa product page. Where an older database figure disagrees, the note is under Sources & notes.

## Sources & notes

Prusament PETG Ultraglow (PETG) is not in the Open Filament Database dump dated 2026-10-13. The Prusa product page lists a nozzle temperature of 260 ± 10 °C (500 ± 18 °F), recorded here as 250–270 °C (482–518 °F), and a heatbed temperature of 85 ± 10 °C (185 ± 18 °F), recorded here as 75–95 °C (https://www.prusa3d.com/product/prusament-petg-ultraglow-green-800g-nfc/), checked 2026-10-16. Diameter is 1.75 mm ± 0.04 mm. Print speed is not in our current sources.

Manufacturer page checked: 2026-10-16. Not an Open Filament Database record.

- Material: PETG
- Nozzle: 250–270 °C (482–518 °F)
- Bed: 75–95 °C (167–203 °F)
- Dry: not in our current sources
- Print speed: not in our current sources
- Hardened nozzle: yes
- Source: https://www.prusa3d.com/product/prusament-petg-ultraglow-green-800g-nfc/

## What nozzle temperature does Prusament PETG Ultraglow recommend?

The Prusa product page lists a nozzle temperature of 260 ± 10 °C (500 ± 18 °F), recorded here as 250–270 °C (482–518 °F).

## What bed temperature does Prusament PETG Ultraglow recommend?

The Prusa product page lists a heatbed temperature of 85 ± 10 °C (185 ± 18 °F), recorded here as 75–95 °C (167–203 °F).

## What print speed does Prusament PETG Ultraglow list?

Print speed and volumetric flow are not in our current sources on the Prusa product page.

## Does Prusament PETG Ultraglow require an enclosure?

An enclosure requirement is not in our current sources on the Prusa product page.

## Does Prusament PETG Ultraglow require a hardened nozzle?

Yes. The Prusa product page says this is a highly abrasive material and needs a hardened nozzle. It recommends a 0.6 mm hardened non-high-flow nozzle.

## How should Prusament PETG Ultraglow be dried?

The Prusa product page says to dry the filament before use and marks drying as optional. A drying temperature and drying time are not in our current sources.

## What spool weights does Prusament PETG Ultraglow come in?

Listed spool weights: 800 g and a 25 g sample.

## What is the price per kilogram of Prusament PETG Ultraglow?

Price per kilogram is not in our current sources on the filament record. A checked retailer price, when one exists, is a separate deal file.