# ELEGOO PETG HF print settings (nozzle, bed, dry)

ELEGOO PETG HF has no nozzle or bed temperature in our current sources, per ELEGOO PETG HF US product page.

No nozzle or bed temperature on the source. Dry 8 h at 60 °C (140 °F) if it's been open. Listed speed up to 600 mm/s.

Those settings follow the ELEGOO PETG HF US product page. Where an older database figure disagrees, the note is under Sources & notes.

## Sources & notes

ELEGOO PETG HF is not in the Open Filament Database dump dated 2026-10-13. Nozzle and bed temperatures are not in our current sources on the ELEGOO US product page checked 2026-10-16. The page lists print speed up to 600 mm/s and drying for 8 hours.

Manufacturer page checked: 2026-10-16. Not an Open Filament Database record.

- Material: PETG
- Nozzle: not in our current sources
- Bed: not in our current sources
- Dry: 60 °C (140 °F) for 8 h
- Print speed: up to 600 mm/s
- Hardened nozzle: not recorded
- Source: https://us.elegoo.com/products/petg-hf

## What nozzle temperature does ELEGOO PETG HF recommend?

A recommended nozzle temperature for ELEGOO PETG HF is not in our current sources on the ELEGOO US product page.

## What bed temperature does ELEGOO PETG HF recommend?

A recommended bed temperature for ELEGOO PETG HF is not in our current sources on the ELEGOO US product page.

## What print speed does ELEGOO PETG HF list?

The ELEGOO US product page lists print speed up to 600 mm/s and recommends moderate speeds for the most consistent quality.

## Does ELEGOO PETG HF require an enclosure?

An enclosure requirement is not in our current sources on the ELEGOO US product page.

## Does ELEGOO PETG HF require a hardened nozzle?

A hardened-nozzle requirement is not in our current sources.

## How should ELEGOO PETG HF be dried?

The ELEGOO US product page says to dry PETG HF at 60 °C (140 °F) for 8 hours before use.

## What spool weights does ELEGOO PETG HF come in?

Listed spool weight: 1 kg (1000 g). Empty spool weight: 154 ± 10 g.

## What is the price per kilogram of ELEGOO PETG HF?

Price per kilogram is not in our current sources on the filament record. A checked retailer price, when one exists, is a separate deal file.