# Anycubic TPU 68D settings: 210–250 °C (410–482 °F)

Anycubic TPU 68D prints at 210–250 °C (410–482 °F) nozzle and 35–60 °C (95–140 °F) bed, per Anycubic product page.

Print at 210–250 °C (410–482 °F) nozzle, 35–60 °C (95–140 °F) bed. Dry 6–8 h at 65–75 °C (149–167 °F) if it's been open. Listed speed 40–250 mm/s.

Those settings follow the Anycubic product page. Where an older database figure disagrees, the note is under Sources & notes.

## Sources & notes

Anycubic TPU 68D (TPU) lists 210–250 °C (410–482 °F) nozzle and 35–60 °C (95–140 °F) bed, from the Anycubic product page (https://store.anycubic.com/products/tpu-68d), checked 2026-10-26. The same check lists print speed 40–250 mm/s, drying 65–75 °C (149–167 °F) for 6–8 h, Shore hardness 68D, which is not a Shore A value, listed price $31.99, not stored as a price per kilogram.

Manufacturer page checked: 2026-10-26. Not an Open Filament Database record.

- Material: TPU
- Nozzle: 210–250 °C (410–482 °F)
- Bed: 35–60 °C (95–140 °F)
- Dry: 65–75 °C (149–167 °F) for 6–8 h
- Print speed: 40–250 mm/s
- Hardened nozzle: not recorded
- Source: https://store.anycubic.com/products/tpu-68d

## What nozzle temperature does Anycubic TPU 68D recommend?

Anycubic TPU 68D lists a recommended nozzle temperature of 210–250 °C (410–482 °F) on the Anycubic product page.

## What bed temperature does Anycubic TPU 68D recommend?

Anycubic TPU 68D lists a recommended bed temperature of 35–60 °C (95–140 °F) on the Anycubic product page.

## What print speed does Anycubic TPU 68D list?

Anycubic TPU 68D lists a print speed 40–250 mm/s on the Anycubic product page.