# Anycubic PVA: 220–240 °C (428–464 °F), 35–65 °C (95–149 °F)

Anycubic PVA prints at 220–240 °C (428–464 °F) nozzle and 35–65 °C (95–149 °F) bed, per Anycubic product page.

Print at 220–240 °C (428–464 °F) nozzle, 35–65 °C (95–149 °F) bed. Dry 8–12 h at 75–85 °C (167–185 °F) if it's been open. Listed speed up to 200 mm/s.

Those settings follow the Anycubic product page. Where an older database figure disagrees, the note is under Sources & notes.

## Sources & notes

Anycubic PVA (PVA) lists 220–240 °C (428–464 °F) nozzle and 35–65 °C (95–149 °F) bed, from the Anycubic product page (https://store.anycubic.com/products/pva), checked 2026-10-26. The same check lists print speed up to 200 mm/s, drying 75–85 °C (167–185 °F) for 8–12 h, listed price $37.99, not stored as a price per kilogram.

Manufacturer page checked: 2026-10-26. Not an Open Filament Database record.

- Material: PVA
- Nozzle: 220–240 °C (428–464 °F)
- Bed: 35–65 °C (95–149 °F)
- Dry: 75–85 °C (167–185 °F) for 8–12 h
- Print speed: up to 200 mm/s
- Hardened nozzle: not recorded
- Source: https://store.anycubic.com/products/pva

## What nozzle temperature does Anycubic PVA recommend?

Anycubic PVA lists a recommended nozzle temperature of 220–240 °C (428–464 °F) on the Anycubic product page.

## What bed temperature does Anycubic PVA recommend?

Anycubic PVA lists a recommended bed temperature of 35–65 °C (95–149 °F) on the Anycubic product page.

## What print speed does Anycubic PVA list?

Anycubic PVA lists a print speed up to 200 mm/s on the Anycubic product page.