# Anycubic PLA Translucent settings: 200–230 °C (392–446 °F)

Anycubic PLA Translucent prints at 200–230 °C (392–446 °F) nozzle and 55–70 °C (131–158 °F) bed, per Anycubic product page.

Print at 200–230 °C (392–446 °F) nozzle, 55–70 °C (131–158 °F) bed. Dry 6–8 h at 50–55 °C (122–131 °F) if it's been open. Listed speed 50–250 mm/s.

Those settings follow the Anycubic product page. Where an older database figure disagrees, the note is under Sources & notes.

## Sources & notes

Anycubic PLA Translucent (PLA) lists 200–230 °C (392–446 °F) nozzle and 55–70 °C (131–158 °F) bed, from the Anycubic product page (https://store.anycubic.com/products/pla-translucent), checked 2026-10-26. The same check lists print speed 50–250 mm/s, drying 50–55 °C (122–131 °F) for 6–8 h, volumetric flow up to 12 mm³/s, an enclosure is not required, a hardened nozzle is not required, listed price $19.99, not stored as a price per kilogram.

Manufacturer page checked: 2026-10-26. Not an Open Filament Database record.

- Material: PLA
- Nozzle: 200–230 °C (392–446 °F)
- Bed: 55–70 °C (131–158 °F)
- Dry: 50–55 °C (122–131 °F) for 6–8 h
- Print speed: 50–250 mm/s
- Hardened nozzle: not recorded
- Source: https://store.anycubic.com/products/pla-translucent

## What nozzle temperature does Anycubic PLA Translucent recommend?

Anycubic PLA Translucent lists a recommended nozzle temperature of 200–230 °C (392–446 °F) on the Anycubic product page.

## What bed temperature does Anycubic PLA Translucent recommend?

Anycubic PLA Translucent lists a recommended bed temperature of 55–70 °C (131–158 °F) on the Anycubic product page.

## What print speed does Anycubic PLA Translucent list?

Anycubic PLA Translucent lists a print speed 50–250 mm/s on the Anycubic product page.