# Anycubic PLA-CF settings: 210–250 °C (410–482 °F)

Anycubic PLA-CF prints at 210–250 °C (410–482 °F) nozzle and 55–70 °C (131–158 °F) bed, per Anycubic product page.

Print at 210–250 °C (410–482 °F) nozzle, 55–70 °C (131–158 °F) bed. Dry 6–8 h at 55 °C (131 °F) if it's been open. Listed speed 40–250 mm/s.

Those settings follow the Anycubic product page. Where an older database figure disagrees, the note is under Sources & notes.

## Sources & notes

Anycubic PLA-CF (PLA) lists 210–250 °C (410–482 °F) nozzle and 55–70 °C (131–158 °F) bed, from the Anycubic product page (https://store.anycubic.com/products/pla-cf-filament), checked 2026-10-26. The same check lists print speed 40–250 mm/s, drying 55 °C (131 °F) for 6–8 h, volumetric flow up to 20 mm³/s, a hardened nozzle is required, listed price $26.99, not stored as a price per kilogram.

Manufacturer page checked: 2026-10-26. Not an Open Filament Database record.

- Material: PLA
- Nozzle: 210–250 °C (410–482 °F)
- Bed: 55–70 °C (131–158 °F)
- Dry: 55 °C (131 °F) for 6–8 h
- Print speed: 40–250 mm/s
- Hardened nozzle: yes
- Source: https://store.anycubic.com/products/pla-cf-filament

## What nozzle temperature does Anycubic PLA-CF recommend?

Anycubic PLA-CF lists a recommended nozzle temperature of 210–250 °C (410–482 °F) on the Anycubic product page.

## What bed temperature does Anycubic PLA-CF recommend?

Anycubic PLA-CF lists a recommended bed temperature of 55–70 °C (131–158 °F) on the Anycubic product page.

## What print speed does Anycubic PLA-CF list?

Anycubic PLA-CF lists a print speed 40–250 mm/s on the Anycubic product page.