# Anycubic PETG-CF settings: 240–270 °C (464–518 °F)

Anycubic PETG-CF prints at 240–270 °C (464–518 °F) nozzle and 65–70 °C (149–158 °F) bed, per Anycubic product page.

Print at 240–270 °C (464–518 °F) nozzle, 65–70 °C (149–158 °F) bed. Dry 6–8 h at 60–65 °C (140–149 °F) if it's been open. Listed speed 40–250 mm/s.

Those settings follow the Anycubic product page. Where an older database figure disagrees, the note is under Sources & notes.

## Sources & notes

Anycubic PETG-CF (PETG) lists 240–270 °C (464–518 °F) nozzle and 65–70 °C (149–158 °F) bed, from the Anycubic product page (https://store.anycubic.com/products/petg-cf-filament), checked 2026-10-26. The same check lists print speed 40–250 mm/s, drying 60–65 °C (140–149 °F) for 6–8 h, volumetric flow up to 11 mm³/s, a hardened nozzle is required, listed price $25.99, not stored as a price per kilogram.

Manufacturer page checked: 2026-10-26. Not an Open Filament Database record.

- Material: PETG
- Nozzle: 240–270 °C (464–518 °F)
- Bed: 65–70 °C (149–158 °F)
- Dry: 60–65 °C (140–149 °F) for 6–8 h
- Print speed: 40–250 mm/s
- Hardened nozzle: yes
- Source: https://store.anycubic.com/products/petg-cf-filament

## What nozzle temperature does Anycubic PETG-CF recommend?

Anycubic PETG-CF lists a recommended nozzle temperature of 240–270 °C (464–518 °F) on the Anycubic product page.

## What bed temperature does Anycubic PETG-CF recommend?

Anycubic PETG-CF lists a recommended bed temperature of 65–70 °C (149–158 °F) on the Anycubic product page.

## What print speed does Anycubic PETG-CF list?

Anycubic PETG-CF lists a print speed 40–250 mm/s on the Anycubic product page.