# Anycubic PET-CF settings: 260–290 °C (500–554 °F)

Anycubic PET-CF prints at 260–290 °C (500–554 °F) nozzle and 80–100 °C (176–212 °F) bed, per Anycubic product page.

Print at 260–290 °C (500–554 °F) nozzle, 80–100 °C (176–212 °F) bed. Dry 8–12 h at 80–90 °C (176–194 °F) if it's been open. Listed speed 30–60 mm/s.

Those settings follow the Anycubic product page. Where an older database figure disagrees, the note is under Sources & notes.

## Sources & notes

Anycubic PET-CF (PET) lists 260–290 °C (500–554 °F) nozzle and 80–100 °C (176–212 °F) bed, from the Anycubic New Materials collection page (https://store.anycubic.com/collections/new-materials), checked 2026-10-26. The same check lists print speed 30–60 mm/s, drying 80–90 °C (176–194 °F) for 8–12 h, volumetric flow up to 8 mm³/s, a hardened nozzle is required, listed price $39.99, not stored as a price per kilogram. Drying and the other settings are from the product page (https://store.anycubic.com/products/pet-cf). The product page spec table does not list nozzle or bed.

Manufacturer page checked: 2026-10-26. Not an Open Filament Database record.

- Material: PET
- Nozzle: 260–290 °C (500–554 °F)
- Bed: 80–100 °C (176–212 °F)
- Dry: 80–90 °C (176–194 °F) for 8–12 h
- Print speed: 30–60 mm/s
- Hardened nozzle: yes
- Source: https://store.anycubic.com/products/pet-cf

## What nozzle temperature does Anycubic PET-CF recommend?

Anycubic PET-CF lists a recommended nozzle temperature of 260–290 °C (500–554 °F) on the Anycubic New Materials collection page.

## What bed temperature does Anycubic PET-CF recommend?

Anycubic PET-CF lists a recommended bed temperature of 80–100 °C (176–212 °F) on the Anycubic New Materials collection page.

## What print speed does Anycubic PET-CF list?

Anycubic PET-CF lists a print speed 30–60 mm/s on the Anycubic product page.