# Anycubic PA6-CF settings: 260–300 °C (500–572 °F)

Anycubic PA6-CF prints at 260–300 °C (500–572 °F) nozzle and 40–110 °C (104–230 °F) bed, per Anycubic product page.

Print at 260–300 °C (500–572 °F) nozzle, 40–110 °C (104–230 °F) bed. Dry 8–12 h at 90–100 °C (194–212 °F) if it's been open. Listed speed 50–100 mm/s.

Those settings follow the Anycubic product page. Where an older database figure disagrees, the note is under Sources & notes.

## Sources & notes

Anycubic PA6-CF (PA/CF) lists 260–300 °C (500–572 °F) nozzle and 40–110 °C (104–230 °F) bed, from the Anycubic product page (https://store.anycubic.com/products/pa6-cf), checked 2026-10-26. The same check lists print speed 50–100 mm/s, drying 90–100 °C (194–212 °F) for 8–12 h, an enclosure is required, a hardened nozzle is required, listed price $38.99, not stored as a price per kilogram.

Manufacturer page checked: 2026-10-26. Not an Open Filament Database record.

- Material: PA/CF
- Nozzle: 260–300 °C (500–572 °F)
- Bed: 40–110 °C (104–230 °F)
- Dry: 90–100 °C (194–212 °F) for 8–12 h
- Print speed: 50–100 mm/s
- Hardened nozzle: yes
- Source: https://store.anycubic.com/products/pa6-cf

## What nozzle temperature does Anycubic PA6-CF recommend?

Anycubic PA6-CF lists a recommended nozzle temperature of 260–300 °C (500–572 °F) on the Anycubic product page.

## What bed temperature does Anycubic PA6-CF recommend?

Anycubic PA6-CF lists a recommended bed temperature of 40–110 °C (104–230 °F) on the Anycubic product page.

## What print speed does Anycubic PA6-CF list?

Anycubic PA6-CF lists a print speed 50–100 mm/s on the Anycubic product page.